RUINET is a liquid sand filter cleaner for cleaning and maintaining the filter at the end or at the start of the swimming season. No more trouble with caked sand: the filter filters properly again, for clean and healthy water.
Benefits
- Excellent filtration for clean and healthy water
- Correct, effortless pump operation
- Easy replacement of the old quartz sand
Directions for use
One of the following methods is normally used:
Method A
- Open the filter lid so that there is adequate ventilation.
- Add RUINET at a ratio of 30-40% of the water remaining inside the sand filter.
- Leave the product to act for 3-12 hours, depending on the amount of caked material inside the filter.
- Drain the filter and rinse with plenty of water.
- For best results, rinse again with a PH-PLUS solution.
Method B
- Isolate the filter from the pool and connect the pump suction and discharge to a plastic drum containing a RUINET solution at a ratio of 30-40%.
- Circulate the RUINET solution through the filter for 3-6 hours.
- Drain the liquid from the filter and rinse with plenty of water.
- For best results, rinse again with a PH-PLUS solution.
Composition
RUINET is a strongly acidic product. It is a water-soluble mixture of organic and inorganic acids.
Safety precautions
- Always wear protective gloves and goggles.
- Keep the product out of the reach of children.
Frequently asked questions
- When should I clean my sand filter with RUINET? At the end or at the start of the swimming season, or whenever the sand has caked.
- How much RUINET do I need? 30-40% of the water inside the filter (Method A), or a 30-40% solution in the drum (Method B).
- How long should it act? 3-12 hours with Method A, or 3-6 hours of circulation with Method B.
Need help choosing? Call us on +30 210 3002959 or email info@e-pool.gr.
No posts found
