SOLACID-2 is an acidic solid product in granular form for cleaning sand filters of calcium and magnesium scale and, in general, of water hardness deposits. It is used in swimming pools at the start or at the end of the swimming season.
It gives excellent results on all inorganic deposits and also carries away organic dirt during cleaning. It is essential for maintaining the filter and keeping it working well during the swimming season; this way you achieve excellent filtration and better water quality.
Cleaning the filter is also recommended at the end of the swimming season, before closing the pool, or at the start of the new season, before starting up the pool, swimming facility or spa.
Composition
- Mixture of inorganic and organic acids, in solid (granular) form
Cleaning procedure
- Open the filter lid so that there is adequate ventilation.
- If the sand is caked: add SOLACID-2 at a ratio of 30-50% of the water remaining inside the sand filter.
- If the sand is not caked and you simply want to clean it: dissolve the product at a ratio of 1-2 kg in 10 kg of water and fill the filter until the sand is covered.
- Leave the product to act for 3-12 hours, depending on the amount of caked material inside the filter.
- Drain the filter and rinse with plenty of water.
Safety precautions
- Always wear protective gloves and goggles.
- Keep the product out of the reach of children.
Frequently asked questions
- How much SOLACID-2 do I need? For caked sand, 30-50% of the water inside the filter; for routine cleaning, 1-2 kg in 10 kg of water, enough to cover the sand.
- How long do I leave the product in the filter? 3-12 hours, depending on the amount of caked material.
- When is cleaning recommended? At the end of the season before closing the pool, or at the start of the new season before start-up.
Need help choosing? Call us on +30 210 3002959 or email info@e-pool.gr.
No posts found
