The MP 0.5 hp II pool pump is a single-phase pump with a large pre-filter and a flow of 10 m³/h, for private pools. The large pre-filter together with good hydraulic performance gives effective filtration, and the AISI-316 stainless steel seals and shaft make it suitable for sea water as well.
Features
- Large pre-filter with an oversized basket
- Transparent polycarbonate lid for easy basket inspection
- No part of the motor comes into contact with the water, so there is no electrical contact with it
- Pump body and diffuser in polyester-reinforced polypropylene, resistant to pool chemicals
- Impeller in Noryl, aluminium base
- Shaft, seal set and mechanical seal in AISI-316 stainless steel, suitable for sea water
- Stainless steel screws
- Motor bearings and seals selected for long life and quiet operation
Technical data
- Power: 0.5 hp
- Flow: 10 m³/h
- Power supply: single-phase (II)
- Connections: 1.5" female thread or Ø 50 PVC solvent-weld pipe
- Motor: asynchronous, totally enclosed fan-cooled, IP55, insulation class F
- Frequency / speed: 50Hz (60Hz on request) / 2850 rpm
- Maximum water temperature: +40 °C
Frequently asked questions
- Is it suitable for sea water? Yes, the AISI-316 seals and shaft are suitable for operation with sea water.
- How much water does it circulate? At its rated flow of 10 m³/h, in 8 hours of operation it can theoretically circulate up to 80 m³ of water; in practice slightly less, because of the resistance of the pipework and filter.
- What pipe do I need? It connects with a 1.5" female thread or with Ø 50 PVC solvent-weld pipe.
Need help choosing? Call us on +30 210 3002959 or email info@e-pool.gr.
No posts found
