Chemical treatment of pool water
First adjust the pH between 7.2 & 7.4 .This arrangement depends on the one hand the rest of chemical treatment, ie the ability of active chemical used in the next 2 stages (high pH, non-chemical action) & the other hand clear or toxicity of the water, ie water with a pH below 7 is toxic (irritating to skin, eyes, etc.) . The pH adjustment is achieved by using pH-MINUS or pH + PLUS you decrease or raise the pH, respectively. One hundred grams (100gr) pH-MINUS or pH + PLUS decrease or 10m3 water to raise the pH by 0.1 degree when the pH is between 7.2 & 7.8 then add special fungicide liquid algicide to avoid the development of algae ( prasiniles) to the sides and bottom of the pool. The algae are plant organisms occurring in the atmosphere in powder form and just be in a temperature & humidity creating smoke out the water slicy & green color on the walls and bottom of the pool. The initial dose of algicide is 3 liters of 100m3 of water and the maintenance dose is 60gr each 10m3 of water per week. To disinfect the water we use Organic Chlorine granules or tablets, depending on the chlorinator we have. To start we use Chlorine granules immediate dismantling (DICHLOR) in proportion 800gr per 100m3 of water. The daily supply with load swimmers and water temperature varies between 1-2gr/m3/imera. If we use Chlorine Tablets 200g. The dosage is 2 tablets per 50m3 of water per week. The dose is increased at high temperatures and heavy use.
There are no products in this section
